Tacoma 105 

The Tacoma 105 is a screw-mount overhead fixture with a raised flat trim ring that coordinates with our Portland and Tacoma 155 downlights.
Tacoma 105 PowerLED, 2 x 3W LEDs,  Frosted Lens, 10-30VDC
The Tacoma 105 PowerLED is the latest in a series of four high-output downlights bridging the gap between the smaller Portland PowerLED and the larger Tacoma 155. An ideal ceiling spot for mid to large sized water craft. The Tacoma 105 incorporates our latest duo-chip technology to deliver exceptionally high lumen output. Its custom designed reflector and frosted lens combine for a smooth aperture appearance resulting in a symmetric and wide beam light pattern without the distracting striations that are common with traditional halogen and incandescent lighting.

Features & Benefits:
  • Stainless steel twist-on trim ring
  • Shallow installation depth
  • Integrated drive electronics
  • PWM dimming interface
  • No radiated heat
  • Substantial power savings
  • High lumen output (equivalent to 25W halogen)
  • Cooler cabin temperatures
  • Maintenance-free; no more bulb changes
 

Product Details
Lens Material: Tempered Sanded Glass
Trim Ring Diameter: 4.134" (105mm)
Cut-out Diameter: 3.031" (77mm)
Recessed Depth: 1.361" (34.6mm)
Voltage: 10-30VDC
Input Power (Watts): 5.5W
LED Engine: 2 x 3W Cree LEDs - Warm White
Beam Angle (FWHM): 84°
Lifetime Hrs (70% lm): 50,000 hrs (70% light output)
Electrical Protection: Reverse Polarity, Spikes (up to 200V), Transient Protection
Safety Standards Compliance: No
Dimmer Module: See ILIM80110
Mounting Method: Screw-Mount
Wire Size: See Chart
Ingress Protection: IP65
Manufacturer: Imtra
Weight: 0.500 lbs.
ILIM10800
Tacoma 105 PowerLED, White, 2 x 3W LEDs, Warm White, Frosted Lens, 10-30VDC
ILIM10801
Tacoma 105 PowerLED, Stainless Steel, 2 x 3W LEDs, Warm White, Frosted Lens, 10-30VDC
ILIM10810
Tacoma 105 PowerLED, White, 2 x 3W LEDs, Cool White, Frosted Lens, 10-30VDC
ILIM10811
Tacoma 105 PowerLED, Stainless Steel, 2 x 3W LEDs, Cool White, Frosted Lens, 10-30VDC